Telect MIX 56 - Manual (Page 115)

MIX 56 User Manual 5 Owner Maintenance
122188-10 A0 Telect, Inc. 5-15
Step Action
1. From the Directory screen, type 10 to select Update Flash and
press Enter.
The Update Flash screen appears.
2. Tab to the [Program Transfer] button and press Enter.
A warning screen appears asking you to confirm updating the
standby card flash.
NOTE
If you get an error message saying no standby card has been detect-
ed, you cannot use this procedure—you need to use “Serial Load”
as described in “Craft Port Update.”
3. Type y and press Enter.
The message, “Flash update in process...please wait” appears on the
Transfer Program to Standby Card line. When the process is com-
plete, the message changes to “***Flash update successful***”.