Telect MIX 56 - Manual (Page 53)

MIX 56 User Manual 4 Software Operation
122188-10 A0 Telect, Inc. 4-7
Save Configuration and Restore Configuration Screens
* “Factory” only appears on the Restore screen and not the Save screen.
System Settings Screen
* Needs to be set on power up.
High-Speed Configuration Screen
Field Default Setting
#1, Name “Working Config”
#2, Name “Test 1”
#3, Name “Test 2”
#4, Name “Factory” *
Field Default Setting
System Name “MIX 56”
System Location Blank
Contact Person Blank
Date Varies *
Time Varies *
AIS Terminals LB “Yes” (as per T1.403)
Low Speed Type “T1”
LS Remote LB DIR “DS3”
Active Card Determined by system at power-up
Redundant M13 Cards “Yes”
ACO Time “15 min.”
Inactivity Timeout “15 min.”
Loopback Permission “No”
Reset “Standby Card”
Control “Local”
Telnet TL1 No
Chassis and Card Versions Vary depending on release date
Field Default Setting
Name “High Speed”
Clock Source “DS3 Loop Timing”
Mode “M13”
Optional C-bit LAPD Information Blank