Tektronix K1297-G20 - Manual (Page 189)

Appendix D: Windows XPe Troubleshooting
K1297-G20 Monitor User Manual E-11
11. Follow the instructions in the EasyRestore wizard and start the
recovery process. The recovery process may take some minutes. A
progress indicator displays the percentage of the process that has been
completed.
12. Wait until completion and remove the Recovery CD from the CD-RW
drive.
13. Press <CTRL> <ALT> <DELETE> to restart the device.
H Windows XPe starts. The initialization phase takes some minutes.
H An XPe by Tektronix dialog box opens displaying the current
windows settings (computer name, domain name, and account).
Confirm these settings with OK.
H Another XPe by Tektronix dialog box opens. Enter the actual
computer name or your device number into this dialog box and
confirm your entry with OK.
Windows XPe restarts once again. The image of the Recovery CD
has been restored on your K1297.
Reinstall the K1297-G20 Software. After the Windows XPe repair process, you
must reinstall the K1297-G20 Monitor software. To reinstall the
K1297-G20 Monitor software, proceed as described in the Software
Installation chapter.