Tektronix K1297-G20 User Manual
Page 39
Getting Started
K1297-G20 Monitor User Manual
27
Which Board into which Slot?
The measuring boards and the slots are marked with different colors. So
exchanging the measuring modules is made easy for you. The colors of the
boards have the following meaning:
H GREEN stands for all measuring boards for WAN interfaces such as
E1/DS1, S
0
, U
2B1Q
, V.X, Ethernet. Put green boards into green slots.
H YELLOW stands for the AP-4 Board. You can put yellow boards in
either green or transparent slots.
H TRANSPARENT stands for the PC board. Put transparent boards into
transparent slots.
CAUTION. If you put a “wrong” board into a slot, you could damage the
board and the instrument.
Slot 0 and 1 are reserved for the PC boards only. Do not put the PC board
into other slots and do not put other boards into slots 0 and 1.