Tektronix K1297-G20 User Manual
Page 27
Getting Started
K1297-G20 Monitor User Manual
15
The following interfaces are located on the cover of the PC module in
slot 1:
H Socket for external PS/2 keyboard (KBD)
H Serial interface (COM1)
H Parallel interface (LPT1)
H 10Base-2 and 10Base-T sockets for LAN connection
H Socket for external monitor (VGA)
For further information on the individual interfaces, please refer to
Appendix A: Interfaces.
To reset the Protocol Tester in an emergency, use a pointed tool and insert
it into the RESET switch located on the cover of the PC module. There is
also an LED indicating the operating state of the hard disk (HD).
Slots 2 to 5 are available for the measuring modules. For further
information on the individual measuring boards, please refer to
Appendix A: Interfaces.
NOTE. You will find information on pin assignment of the individual
sockets also in Appendix A.