Tektronix K1297-G20 - Manual (Page 38)

Getting Started
26 K1297-G20 Monitor User Manual
Exchanging Measuring Modules
E1/DS1, ISDN BAI S
0
, and U
2B1Q
, as well as V./X. and Ethernet interface
boards are available as measuring modules. ATM modules will be
available in the future.
You can easily install and remove the measuring modules from slots 2 to 5
(behind the PC board). You can control the individual measuring modules
and the interface sockets via applications.
CAUTION. The device must be switched off completely. All modules contain
electrostatically sensitive components. Observe the necessary precautions
and ESD safety instructions.
Make sure the VME bus address on the new module is set correctly (see
page 30).