Tektronix K1297-G20 - Manual (Page 65)

Getting Started
K1297-G20 Monitor User Manual 53
Removing the Software
To remove K1297-G20 Monitor software, proceed as follows:
1. Close all applications.
2. Start the Tektronix K1297 remove program by selecting:
Start / Settings / Control Panel / Add or Remove
Programs:
Tektronix K1297-Mon Protocol Tester
and press Add/Remove.
Remove the K1297-G20 Monitor software by selecting dedicated or all
entries in the list of installed components.
User Data will be preserved.
3. Reboot the system after removing has been completed successfully.