Tektronix K1297-G20 - Manual (Page 87)

Examples
K1297-G20 Monitor User Manual 75
3. To start recording, click the ON/OFF switch of the Recording
pipeline branch to ON .
The signalling data of the activated data flow are written to the
recording file until the file is full or until you terminate the process.
The data in the recording file can be read after the current measure-
ment is complete.
You can stop recording by clicking the ON/OFF switch of the
Recording branch to OFF.
NOTE. In most cases, data are recorded and reviewed at different times. It
is however possible to check the contents of the recording file immediately
after recording data. A description on how to review recorded data you
find on the following pages.