Tektronix K1297-G20 - Manual (Page 28)

Getting Started
16 K1297-G20 Monitor User Manual
4. Push the front cover upwards and fold the cover towards you.
The following interfaces are located behind the front cover and beneath
the display:
H Keyboard connection (KEYBOARD): If the keyboard interface on the
PC module’s cover (KBD) is used with an external keyboard, the
KEYBOARD connector must not be plugged in.
H Connections for alarm triggering and for a programmable relay. The
synchronizing sockets can be used for data or timestamp synchroniza-
tion of several K1297s (option).
H Serial interface (COM2)
H SCSI connection (SCSI I/O BUS), for example for an external
CD-ROM or CD-RW drive
Furthermore, the LEDs for power supply (top) and hard disk access
are located beneath the display.
NOTE. You will find information on pin assignment of the individual
sockets also in Appendix A.