Trango Broadband Access5830 - Manual (Page 17)

Basic Configuration via Browser Interface
Trango Broadband Wireless — Access5830 User Manual Rev. F page 13
1. Connect to the AP (see Getting Started), and open the Subscriber Database page.
2. Enter the SU ID.
3. Select either PRIORITY or REGULAR.
4. If SU will be part of an SU to SU group, enter the SU to SU group number.
!
Note: SUs using SU to SU communication must be on the same subnet!
5. Enter the SU’s CIR.
6. Enter the SU’s MIR.
7. Enter the SU’s Device ID.
8. Click Save and Activate changes.
!
Important! Always remember to Save and Activate changes, or the SUDB will revert back to its previous state after a
power cycle or reboot.