Cabling and grounding considerations – Trango Broadband Access5830 User Manual
Page 36
Mounting Hardware
Trango Broadband Wireless — Access5830 User Manual Rev. F
page 32
DISH MOUNTED ON WALL (HARDWARE
FOX RADIO (M5800S-FSU-D)
MOUNTED ON DISH
WILL DEPEND ON MATERIAL OF WALL)
Figure 7-8: FOX5800-D / AD5800-25 Reflector Dish on Wall
Cabling and Grounding Considerations
Figure 7-9: Grounding Example for M5830 Series
Shielded twisted pair Cat-5 cable is recommended for all installations.
It is important to provide strain relief and drip loop for the STP Cat-5 cables. Strain relief holes are provided on the
FOX5800 and FOX5300 mounting bracket for use with cable tie. Create drip loop and strain relief as shown below.
Proper mounting of the radio includes
consideration for grounding. Please note that if
the radio is attached to a metal pole that is earth-
grounded, no other grounding is necessary. If the
radio is not earth-grounded via the mounting
bracket, you must attach a grounding wire to the
grounding stud on the back of the radio as in the
adjacent diagram.