Trango Broadband Access5830 - Manual (Page 9)

Hardware Overview
Trango Broadband Wireless — Access5830 User Manual Rev. F page 5
At the bottom of the Access5830 are two access ports: a twist-on weatherproof cable port for the RJ-45 Ethernet port, and
an access cover (port plug for the RJ-11 serial port. Most configuration and management tasks can be performed through
the Ethernet port. Below the port plug are three LEDs that provide RF link-status information, and will be discussed later
in this text.
" Note: When placing the port plug, ensure that it is properly seated by pressing around all the edges and in the center.
FOX Series Subscriber Units Hardware Components
Each FOX series subscriber unit comes equipped with the radio itself, a power-over-Ethernet (PoE) J-Box, an AC
adapter, and mounting hardware. The FOX5800 and FOX5300 include hardware for wall or pole mounting (excluding
wall mount screws and pole-mount hose clamps). The FOX5800-D is equipped with a dish/reflector mounting bracket.
RADIO
POWER SUPPLY
(120 VAC - 20 VDC)
(POWER-OVER-ETHERNET INJECTOR)
J BOX
MOUNTING HARDWARE (FOX5300 & FOX5800)
DISH MOUNTING HARDWARE (FOX5800-D ONLY)
- BRACKET, STANDARD
- EXTENDER
- BRACKET, REFLECTOR
- 10-32 X 1" HARDWARE
- 1/4-20 HARDWARE
- (2) 1/4-20 HARDWARE
Figure 3-5: Components of FOX Series Subscriber Units