Trango Broadband Access5830 - Manual (Page 68)

Management
Trango Broadband Wireless — Access5830 User Manual Rev. F page 64
M5300S-FSU: Max: +15 dBm +/- 2 dB
Min: -12 dBm +/- 2 dB
EIRP Max: M5800S-FSU: +36 dBm
M5800S-FSU-D: +46 dBm (with AD5800-25-D Reflector)
M5300S-FSU: +30 dBm
Freq. Stability:
.00025 % PLL stabilized (2.5 ppm) over temp
Freq. Plan: Single upconversion, 480 MHz IF
Modulated BW: 22 MHz (null to null, 20 dB)
2 nd Harmonic atten: Per CFR47 part 15.205
LO Supression: Per CFR47 part 15.205
Symbol Rate: 1.375 MSPS
Error Correction: None
Modulation: 1 Mbps DBPSK for header, 11 Mbps CCK spread spectrum for payload
Receiver Section (check these figures)
Cascade Noise Figure:
< 6 dB
Sensitivity: - 82 dBm typical-1600 byte packet
(1E10-6 BER) - 87 dBm typical-64 byte packet
Adj. Channel Rejection: > 20 dB for 10 % PER
Image Rejection: > 60 dB for 10% PER
Frequency Plan: Single conversion, IF at 480 MHz
LO stability: .00025% PLL stabilized (+/-2.5ppm) over temperature range
Data Input Section
Data Rate (User):
Up to 10 Mbps sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet packet: Up to 1600 byte long packets
Power
Input Voltage:
Input voltage range at unit is 10.5 VDC to 24 VDC max
Power is supplied over Ethernet cable using junction box provided, with up to 300 feet of 24 AWG STP cable.
Current Cons.:
400 mA in transmit mode at max power using 20 V standard adapter (8 W)
Data Output Section
Data Rate (User):
10 Mbps maximum sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet Protocols: TCP/IP, Telnet, TFTP, UDP, and HTTP
Physical Interfaces
LAN
Interface: Shielded RJ45 connector
Power: Carried on 4 unused pins of Ethernet cable
Mechanical and Environmental
General Material:
High Temp ABS/Polycarbonate Enclosure
Size: 9.2”x4.25”3.1”
Weight: 1.5 lb (radio)
Mounting: Polycarbonate Wall/Pole mount bracket
Environmental
Operating
Temp: -40 ° to 60° C
Storage: -40 ° to 85° C
Humidity: 100 % when sealed properly
NEMA Rating: NEMA 4