Trango Broadband Access5830 - Manual (Page 4)

Preface
Trango Broadband Wireless — Access5830 User Manual Rev. F page iv
Section 1 Preface
This manual covers basic configuration and installation of the Access5830 Wireless Broadband System, and applies to
the following radio part numbers:
M5830S-AP-60
Dual-band Access Point with internal sectoral patch antenna
M5800S-FSU FOX5800 5.8 GHz Subscriber Unit
M5300S-FSU FOX5300 5.3 GHz Subscriber Unit
M5800S-FSU-D FOX5800-D 5.8 GHz Subscriber Unit (requires external reflector dish)
M5830S-SU Dual-band Subscriber Unit with integrated patch antenna
M5830S-SU-EXT** Dual-band Subscriber Unit with connector for external antenna
**The M5830S-SU-EXT subscriber unit must be used in conjunction with an FCC certified external antenna (sold
separately). The M5830S-SU-EXT includes two reverse polarity SMA RF Connectors for attachment of external antenna
cables. The installation of the M5830S-SU-EXT requires professional installation due to FCC limits on output power
settings when using the 5.3 GHz U-NII band. Contact your sales person for more information regarding “Professional
Installation Guide.”
FCC Information
This device complies with Part 15 of the FCC Rules and Regulations. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and radiates radio-frequency energy; if not installed and used in accordance
with these instructions, the unit may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in any particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the
interference by one of more of the following measures:
1) Reorient the antenna.
2) Increase the separation between the affected equipment and the unit.
3) Connect the affected equipment to a power outlet on a different circuit from that which the receiver is connected to.
4) Consult the dealer and/or experienced radio/TV technician for help.
FCC ID: NCYM5830SSU
FCC ID: NCYM5830SSUEXT
FCC ID: NCYM5830SAP60
FCC ID: NCYM5800SFSU
FCC ID: NCYM5300SFSU
FCC ID: NCYM5800SFSUD
IMPORTANT NOTE: Intentional or unintentional changes or modifications must not be made unless under the express
consent of the party responsible for compliance. Any such modifications could void the user’s authority to operate the
equipment and will void the manufacturer’s warranty. To comply with FCC RF exposure requirements, the following
antenna installation and device operating configurations must be satisfied. The antenna for this unit must be fixed and
mounted on outdoor permanent structures with a separation distance of at least two meters from all persons. Furthermore,
it must not be co-located or operating in conjunction with any other antenna or transmitter.
Warranty Information
Radios from Trango Broadband Wireless are warranted from one year from date of purchase. Please see
www.trangobroadband.com for a complete description of warranty coverage and limitations.