TechniSat CAM 1 plus - Manual (Page 13)

The sub-menu
Basic
will be displayed.
> You can use the
up/down arrow keys
to move the marker within the menu, and to
change the individual positions as stated. When selecting a menu item, please also
note any additional screen notices.
The following settings can be made:
Parental lock:
Your receiver is provided with a security circuit to prevent use by children. Any programmes
whose reception you have blocked as per points 7.3 and 7.4 can only be received after a
four-digit PIN is entered. You can enable or disable the parental lock facility by pressing the
OK
key while this entry is marked.
GMT Time Offset (hrs.)
Your receiver is provided with a clock. This is synchronised to Greenwich Mean Time by
means of satellite signals. If you do not live in the GMT time zone, you must correct the time
display with the aid of the
OK key, to correspond to your local time. In Germany, standard
time is GMT + 1 hour, and Daylight Savings Time is GMT + 2 hours. When the receiver is in
stand-by mode, the time is shown on the receiver display.
Country
This function provides an automatic change-over between standard (winter) time and day-
light savings (summer) time. Mark the entry
Country
to select your home country, and con-
firm by pressing the OK key
As this information is currently not broadcast by all programme providers, you should initially
select
None
for this setting.
> Press the key Back to return to the menu Settings , or press the Menu key to
return to normal operation. All settings selected will be automatically stored.
Remote control code
Use the OK key in order to decide whether your receiver should be allocated tp the remote
control option
SAT1
or
SAT2
.
Please Note!!
Note that, if you change the remote control option in this menu, the remote control itself must
also be set to the new option.
>
Press the Back key in order to return to the Settings menu, or press MENU in
order to return to normal operation. All settings selected will be automatically stored.
Searchmode
When you are on this line of the menu, decide by means of the OK key whether a program-
me search (see Point 7.7 of this instruction manual) should include only free or all (free-to-air
and encoded/scrambled) channels.
13
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 13