TechniSat CAM 1 plus - Manual (Page 37)

> Use the
up/down arrow
keys to mark the entry
Program
.
> Confirm with the OK key.
The menu >Search>Program will be displayed.
This menu differs from the
Transponder
menu only in terms of the list item
Service ID
.
> Proceed as described in Point 7.7.3 above.
> Use the up/down arrow keys to mark the entry Service ID .
> Use the
numeric key pad
to enter the Service ID number.
7.8 Common Interface
This entry provides you with access to the sub-menus of the CA modules in slots A or B,
when inserted. Use the
arrow keys
to mark the desired function, one of the slots, and con-
firm with OK. You can then obtain information relating to the smart card inserted.
7.9 Activate factory settings/change data channels
You may at any stage revert to the original default settings for the LNB, as set in the factory.
You may also wish to delete the programme list, which may be outdated, completely before
initiating a new search. Please note that, if you delete all programmes from memory, you will
then have to initiate a search, and you will have to copy your selected programmes from the
Total List into the User List.
>
Use the Menu key to display the Main Menu .
> Use the up/down arrow keys to mark the entry Settings .
> Confirm with the
OK
key.
The sub-menu >Settings will be displayed.
37
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 37