TechniSat CAM 1 plus - Manual (Page 19)

IIf the receiver is in TV mode, only TV programmes will be shown, and in Radio mode only
radio programmes will be displayed. The programme currently selected is highlighted in red.
>
You can now proceed to mark the desired programme in blue by using the up/down
arrow
keys.
> Press the OK key, and the desired programme will be shown.
> Use the up/down arrow keys to move up or down the programme list one line at a
time.
> Use the left/right arrow keys to move forward or back one page at a time.
6.2.4 Selecting blocked programmes
If a programme is selected that is subject to parental lock, the words PIN Number will
appear on the screen.
>
Use the numeric key pad to enter your PIN number.
The desired programme can now be viewed.
In order to make this function easy to use, the PIN number needs to be entered only once
during an operational phase. The parental lock feature is only activated again next time the
receiver is switched on.
6.2.5 Information (Info) Box
Every time the programme is changed, an info box will be displayed temporarily, showing the
programme number and name. In addition, any programme features will be shown, e.g.
TxT
for video text, 16/9 for a 16/9 widescreen broadcast, A/B for various audio channels (e.g.
movies with several language soundtracks, or various radio programmes), the Dolby sym-
bol
for Dolby Digital broadcasts, for scrambled programmes or the symbol for
sub-titles.
6.3 Reception of scrambled (encrypted) Programmes
Your receiver is equipped with a Common Interface feature. This enables you to receive
scrambled programmes. In order to receive such programmes, you must insert a CA module
with a valid smart card into one of the two slots provided:
>
Open the cover on the right side of the front panel of the receiver, by opening the
cover downwards as indicated.
> Insert a CA module in one of the two slots provided.
> Insert a smart card in the card slot of the CA module.
Take care to ensure the gold-coloured chip on the smart card is on the upper side, in
the direction in which the card is being inserted.
> If a scrambled programme is now selected, your receiver will automatically check on
both CA slots for the presence of a valid smart card resp. of a CA module with a valid
smart card. If it finds one of these, the scrambled programme will be displayed in
decoded form.
19
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 19