TechniSat CAM 1 plus - Manual (Page 17)

In this way, you can continue to customise the
Menu>Settings>LNB
until all the informa-
tion in this menu correspond to those of your receiving unit. For those switiching criteria you
do not require you should select the setting
No Satellite .
5.4.3 Additional Settings
Now that the switching matrix of your DVB receiver has been adjusted to conform to your
external reception equipment, you should also check on the other settings for your receiving
equipment, and adjust the settings where necessary.
>
Use the
left/right arrow
keys to mark the entry
Check LNB
.
> Using the up/down arrow keys to move around the field Check LNB , select the
satellite position (1-4) that you wish to adjust resp. check on; mark the entry Pro-
ceed
in blue.
> Confirm by pressing OK .
The menu >LNB>Check will now be displayed, together with the DiSEqC setting
selected (e.g.
A/A 1
).
The following settings can be made
LOF low band
LOF (local oscillator frequency) is the frequency used by the LNB to convert the frequency
received into the so-called 1st Intermediate Frequency, which can then be utilised by the
receiver. So-called universal LNBs utilise 2 LOFs in order to cover the whole frequency
range of 10.7 to 11.8 GHz (low band) and 11.7 to 12.75 GHz (high band). Using the numeric
key pad of your remote control, enter here the LOF frequency corresponding to the low band
of your LNB.
LOF high band
As above - using the numeric key pad of your remote control, enter here the LOF frequency
corresponding to the high band of your LNB.
Transition LOF low/high
Use the numeric key pad of your remote control to enter the frequency at which your LNB
switches from low band to high band.
Transponder Test
The following points of this menu should only be entered if you want to test a satellite signal
by means of a self-generated satellite (User 1 to 15).
Transponder frequency
Use the
numeric key pad
to enter a frequency at which digital programmes are broad-
cast.
Polarisation
Use the
OK
key to enter the appropriate polarisation plane (
h
orizontal or
v
ertical) on which
the selected programme is broadcast.
17
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 17