TechniSat CAM 1 plus - Manual (Page 35)

> Use the
up/down arrow
keys to mark the entry
Search
.
> Confirm with the OK key.
The sub-menu >Search will be displayed.
> Use the arrow keys to select the search mode to be used.
> Press the
OK
key to display the relevant sub-menu.
7.7.1 All
When this search mode is activated, all satellites and transponders available in the system
will be scanned. At the end, new programmes will be displayed in red type in the program-
me/channel list.
>
Use the
up/down arrow
keys to select the
All
option.
> Confirm with the OK key.
The legend " Start search " will appear on the display.
> Press
OK
again to start the search
> The search can be terminated at any time by pressing OK .
It is quite likely that a full scan may take 15 minutes or longer.
Please note any notes and information displayed on the screen.
7.7.2 Satellite
This search mode can be used to search a specific satellite. All other satellites will be
ignored in this mode.
>
Use the
up/down arrow
keys to select the Satellite option.
> Confirm with the OK key.
The legend " Start search " will appear on the display.
> Before proceeding further, you will still have to select the satellite to be scanned.
Press the
OK
key.
A selection window will appear with the four available satellite positions.
> Use the up/down arrow keys to select the satellite.
> Confirm with the
OK
key.
> Use the up/down arrow keys to mark the entry Start search .
35
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 35