TechniSat CAM 1 plus - Manual (Page 20)

6.4 Adjusting sound volume
You can adjust the volume of your receiver. This facilitates use of the receiver, as it means
you have all important functions in one remote control, and will have to revert to the remote
control of your TV set only very rarely. Whenever the receiver is switched on, the volume set-
ting used last will be set again.
>
Use the keys Volume + to increase the sound volume, and Volume - to reduce the
volume.
> Press the key
Sound on/Off
to mute the sound. Repeated pressing of this key will
restore the sound.
6.5 Selecting a different language
If a programme is broadcast in several languages, you can select a language as follows:
>>
Press the Language Selection key
The list of languages available will now be displayed on screen.
>> Use the
up/down arrow keys
to select the desired language.
> Confirm by pressing the OK key.
> Disable the menu display by pressing the
Language Selection
key again.
You can now listen to the programme in the selected language. If the programme is chan-
ged, the receiver automatically reverts to the default language setting (see 5.3 Language
Selection). Your receiver also provides the facility to receive mono broadcasts. For mono
transmissions, you can use the
MONO1/MONO2
key to switch between the MONO1 and
MONO2 sound channels.
6.5.1 Dolby Digital (AC3 mode)
If a programme is broadcast in Dolby Digital sound, the Dolby logo will be displayed in the
on-screen information window when the programme is selected. If you have enabled the
Dolby Digital (AC3) function in accordance with Point 5.3, the programme will automati-
cally be reproduced in this format.
If you have not selected the Dolby Digital (AC3) function, you can select AC3 mode manually
as follows:
>
Press the Language Selection (A/B) key .
Any programmes currently available with the appropriate options will be displayed,
showing the available languages and AC3 on the display.
> Use the up/down arrow keys to select the option AC3 .
> Confirm by pressing the
OK
key.
You can now enjoy the current programme in 5.1 channel Surround Sound. If the program-
me is changed, the receiver will automatically revert to the pre-selected language (see Lan-
guage Selection 5.3). In order to continue receiving programmes with the AC3 feature, you
will have to select it again manually, or you can set the receiver for automatic AC3 reproduc-
tion as described in Point 5.3
6.6 TV/Radio selection
Your receiver has been pre-programmed with a selection of radio as well as TV programmes.
When selecting a radio programme, the TV image is switched off, and only the radio pro-
gramme name is displayed.
>
Use the TV/Radio key to select radio mode.
The receiver will automatically go to the last radio programme selected.
> Press the
TV/Radio
key again, and the last TV programme selected will be display-
ed again.
20
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 20