Editing effects – Yamaha AW2400 User Manual
Page 121
Editing Effects
121
AW2400 Owner’s Manual
Eff
ects
14
The AW2400 internal effect parameters can be edited to create precisely the effect your music
requires.
1
Referring to the instructions in “Recalling
Effect Library settings” on page 116, recall
an effect library preset that is based on the
effect type you want to use.
2
Make sure that the Selected Channel sec-
tion [EFFECT] key is engaged and its indi-
cator is lit.
3
Make sure that the EFFECT screen selected
in step 1 is showing.
Selected Channel knobs 1–4 correspond to EFFECT
screens 1–4. Press the appropriate knob to call the
desired screen.
4
Press the Display section [F3] key to
access and edit the effect parameters.
The EFFECT screen FX Edit page will appear.
This page contains the following items.
1 NAME
Indicates the name of the currently selected effect.
B
TYPE
Indicates the type of the currently selected effect.
C
MIX BALANCE field
• BYPASS button............Switches effect bypass on/
off.
• MIX BALANCE knob ....Sets the balance between
the effect and direct sig-
nals. 0% produces direct
sound only, while 100%
produces effect sound only.
D
USED AS
Indicates how this effect is being used. “EFF1”–
“EFF4” indicate that the effect is internally connected
to the mixer section via send/return. If the effect is
inserted into a specific channel the name of the chan-
nel into which the effect is inserted will be shown
(e.g., “INPUT 1”).
E
Level Meter
Displays the effect input or output level. Select input
(IN) or output (OUT) via the button above the meters.
F
Parameter page
In this area you can edit the various effect parameters.
The content and range of the parameters will depend
on the currently selected effect type.
5
Move the cursor to the effect parameter that
you want to edit, and use the [DATA/JOG]
dial or [INC]/[DEC] keys to edit the value.
Depending on the effect type, this area may be used to
show multiple parameter pages. In this case repeatedly
press the CURSOR [
] key to access the parameter
page that contains the parameter you want to edit.
6
To switch effect BYPASS on/off, move the
cursor to the BYPASS button and press the
[ENTER] key.
Editing Effects
B
D
C
A
E
F
• You cannot change the effect type via this page. If you want to
use a different type you will need to recall a library setting that
uses the desired effect type.
NOTE
• Edited effect settings can be stored in the effect library (
HINT