Yamaha AW2400 User Manual
Page 35
Basic operation of the AW2400
35
AW2400 Owner’s Manual
Introducing the A
W2400
2
4
If you want more precise editing control over the parame-
ter selected in step 2, above, press the corresponding
SELECTED CHANNEL knob (1–4) to call up the screen
containing the related parameters.
5
Move the cursor in the screen to the desired parameter,
and use the [DATA/JOG] dial or the [ENTER] key to oper-
ate the parameter.
Selected Key (Lit)
Knob 1
Knob 2
Knob 3
Knob 4
[DYN]
DYNAMICS Screen
DYNAMICS Screen
DYNAMICS Screen
DYNAMICS Screen
[AUX]
AUX1 Screen
AUX2 Screen
AUX3 Screen
AUX4 Screen
[EFFECT]
EFFECT1 Screen
EFFECT2 Screen
EFFECT3 Screen
EFFECT4 Screen
[PAN/EQ]
PAN/EQ Screen
PAN/EQ Screen
PAN/EQ Screen
PAN/EQ Screen
• The display will not change if the SELECTED CHANNEL knob is simply rotated.
To switch screens the knobs must be pressed.
• Other gate functions can be accessed via the DYNAMICS screen, but only
pages and parameters related to compressor operation can be accessed via the
SELECTED CHANNEL knobs.
NOTE