Yamaha AW2400 - Manual (Page 157)

EQ/Dynamics Processor Library Operation
P
an, EQ, and Dynamics Processing
157
AW2400 Owner’s Manual
16
The procedure for storing library settings is as follows.
1
Access the page containing the library to
which the settings are to be stored.
For details on accessing the various library pages refer
to “Accessing the EQ/Dynamics Library screens” on
page 154.
2
Rotate the [DATA/JOG] dial to select the
library number to which the settings are to
be stored.
The setting highlighted by a dotted frame is currently
selected for storage.
3
Move the cursor to the STORE button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
4
As required, enter a name for the selected
library setting, move the cursor to the OK
button, and press the [ENTER] key (refer to
page 32 for details on name entry).
The library setting will be stored.
The procedure for erasing unwanted library settings is as
follows.
1
Access the page containing the library set-
tings to be erased.
For details on accessing the various library pages refer
to “Accessing the EQ/Dynamics Library screens” on
page 154.
2
Rotate the [DATA/JOG] dial to select the
library setting to be erased.
The setting highlighted by a dotted frame is currently
selected to be erased.
3
Move the cursor to the CLEAR button and
press the [ENTER] key.
A popup window confirming the clear operation will
appear.
The following illustration is an example of when the
CLEAR button is pressed in the PAN/EQ screen EQ
Lib. page.
4
To actually erase the selected setting move
the cursor to the OK button and press the
[ENTER] key.
Storing EQ/Dynamics Library
settings
• New settings cannot be stored to read-only library settings (those
marked with an icon).
• If you select and store to a library number that contains previously-
stored data, the previous data will be overwritten.
NOTE
• Pressing the [F2] key while holding the Display section
[SHIFT] key has the same effect as the STORE button.
HINT
• The store NAME EDIT popup window can be disabled if
desired. Refer to “AW2400 Preferences” on page 211 for
details.
HINT
Erasing EQ/Dynamics Library
settings
• Read-only library settings (those marked with an icon) cannot
be erased.
NOTE
• Pressing the [F3] key while holding the Display section
[SHIFT] key has the same effect as the CLEAR button.
HINT