Yamaha AW2400 - Manual (Page 50)

AW2400 Owner’s Manual
Direct recording and Mixed recording
Tr
ac
k recording
50
6
With this method, you can send multiple input channels to Bus 1 or Bus 2, and assign
the mixed signal to one through four tracks. Mixed recording requires fewer tracks, but
you will need to decide on the final volume, pan, and tone of each instrument at the time
of recording (you will not be able to adjust these parameters independently after record-
ing.)
■ Mixed recording
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Bus 1
Mixer section
Input
channels
Stereo
output
channel
Recorder section
Bus 2
[MIC/LINE INPUT]
jacks
• The way in which you assign the input signals to tracks will depend on the
method you choose.
NOTE