Yamaha AW2400 - Manual (Page 73)

73
AW2400 Owner’s Manual
Mixdo
wn and bounce oper
ations
8
Chapter 8
Mixdown and bounce operations
This chapter explains mixdown operations, in which you mix previously-
recorded tracks and record the result on the stereo track. This chapter also
explains how bouncing (ping-pong recording), in which you combine multiple
tracks into one to four tracks.
“Mixdown” is the process by which the signals recorded on the recorder tracks are mixed to ste-
reo, and recorded on the internal stereo track to complete the song. The contents of the stereo
track can be used without further processing as material to create an audio CD.
The diagram below shows the signal flow during mix-
down. The playback of each track is sent to the stereo bus,
passes through the stereo output channel, and is recorded
on the stereo track. At this time you can also add the sig-
nals from input channels.
● Signal flow during mixdown
About mixdown and bouncing
Track 1
Track 2
Track 3
Track 4
Track 5
Stereo
track
Internal Effects
Stereo bus
[MIC/LINE
INPUT]
jacks
Effect
return
Effect
send
Recorder section
Mixer section
Input c
hannels
T
rac
k c
hannels
Eff
ect return c
hannels
Stereo output c
hannel