Yamaha AW2400 - Manual (Page 53)

Direct recording and Mixed recording
53
AW2400 Owner’s Manual
Tr
ac
k recording
6
● Monitor signal flow during recording
This completes the patch setup for direct recording.
Track 1
Track 2
Track 3
Track 4
Track 5
Mixer section
Track
channels
Stereo
output
channel
Recorder section
from the input
channels
Stereo bus
• If you switch the RECORD display page after doing the patch setup all your patch
settings will be undone and lost (a confirmation popup window will appear).
Remember to stay on the same RECORD page until recording is finished.
NOTE