Yamaha AW2400 User Manual
Page 205
Using the MIDI Remote function
MIDI
205
AW2400 Owner’s Manual
20
The MIDI channels corresponding to the faders and [ON]
keys appears as follows when the REMOTE screen 1–12
and 13–16 pages are selected.
■ When the 1–12 page is showing.
■ When the 13–16 page is showing.
To call the REMOTE screen 1–12 page press the Layer
section [REMOTE] key as many times as necessary, or
press the [F1] key after pressing the [REMOTE] key.
To call the REMOTE screen 13–16 page press the Layer
section [REMOTE] key as many times as necessary, or
press the [F2] key after pressing the [REMOTE] key
(Operation of the 13–16 page is the same as the 1–12
page).
This page contains the following items.
1 MODE box
Selects one of the ten presets. Move the cursor to a box
and use the [DATA/JOG] dial or [INC]/[DEC] keys to
select the corresponding preset for instantaneous MIDI
message assignment.
The AW2400 provides the following presets.
●
Cubase
●
Logic
●
Sonar
●
Protools
These presets let you use the AW2400 as a physical con-
troller for various software sequencers.
• [ON] key operations will control mute on/off opera-
tions on the sequencer software.
• Fader operations will control the volume of the
sequencer software tracks.
You will need to install the appropriate setting file into
your sequencer software, and make the necessary settings.
For details, refer to the “About the CD-ROM included
with the AW2400” (
●
Volume/Rec TR
Use this preset to control the volume of an external tone
generator or the record tracks of an external recorder.
• [ON] key operations will transmit MMC commands to
select recording tracks.
• Fader operations will transmit Volume control changes
(CC#=07).
●
Volume
Use this preset to control the volume of an external tone
generator.
• When you turn an [ON] key off (indicator out), volume
= 0 will be transmitted.
• When you turn an [ON] key on (lit green), the volume
value corresponding to the fader position will be trans-
mitted.
• When an [ON] key is on, operating the fader will trans-
mit Volume control change messages (CC#=07).
Fader/[ON] Key
1
2
3
4
5
6
7
8
9
10
11
12
MIDI Channel
1
2
3
4
5
6
7
8
9
10
11
12
Fader/[ON] Key
1
2
3
4
5
6
7
8
9
10
11
12
MIDI Channel
13
14
15
16
N/A
A
C
D
B
• The MIDI Remote function will automatically be on while the
REMOTE screen is displayed. The channel faders and [ON] keys
will not perform their usual functions, but will work as specified by
the preset you have selected in the REMOTE screen.
HINT