Yamaha AW2400 - Manual (Page 138)

AW2400 Owner’s Manual
List of editing command
Tr
ac
k oper
ations and editing
138
15
This section lists all the commands that are provided in the EDIT screen, and explains their
parameters.
Erases the data in the specified region (between Start and
End) of the specified track(s).
*1. V.TR can be selected only if TR=1–24, 1&2–23&24, or ST.
Deletes the data from the specified region of the specified
track(s).
This command is similar to ERASE, but differs in that the
data that follows the specified region will move forward to
fill the gap.
The parameters are the same as for the ERASE command.
Inserts blank space into the specified region. Data follow-
ing the location of the Start parameter will be moved
backward to make room.
The parameters are the same as for the ERASE command.
However instead of
D End, use D Size to specify the
region that will be inserted.
List of editing command
Parameter Range Explanation
A TR
1–24 A single audio track
1&2–23&24
A pair of adjacent odd-numbered/
even-numbered audio tracks
ST The stereo track
ALL Tracks 1–24
B V.TR *1 1–8 Virtual track number
C Start Specify a point Beginning of the edited region
D End Specify a point End of the edited region
ERASE
A B D C
ERASE
Start End
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
■ Parameter list
DELETE
A B D C
DELETE
Start End
1 2 3 4 5 6 7 8
1 2 3 7 8
■ Parameter list
INSERT
A B D
C
INSERT
Start
Size
1 2 3 4 5
1 2 3 4 5 6 4 5
■ Parameter list