Yamaha AW2400 - Manual (Page 13)

Installing an optional card
13
AW2400 Owner’s Manual
Bef
ore y
ou star
t
1
By installing a separately sold mini-YGDAI card in a rear-
panel slot, you can add analog input/output jacks to the
AW2400 or allow connection of external digital devices.
The following types of cards can be used.
Refer to the Yamaha Pro Audio global website for the
most recent information on I/O cards.
http://www.yamahaproaudio.com
Before installing a card, you must check the Yamaha web-
site to make sure that this device is compatible.
http://www.yamahaproaudio.com
To install an optional mini-YGDAI card, proceed as
follows.
1
Make sure that the power is turned off.
2
Loosen the screws that hold the slot cover
in place, and remove the slot cover.
Keep the removed slot cover in a safe place.
3
Align the edges of the card with the guard
rails inside the slot, and insert the card into
the slot.
Push the card all the way into the slot so that the con-
nector at the end of the card is correctly mated with the
connector inside the slot.
4
Use the screws included with the card to
fasten the card in place.
Malfunctions or incorrect operation may occur if the
card is not fastened.
Installing an optional card
Card type Model
Number of
channels
Digital
format Bit
depth
AD card
MY4-AD 4
—
24 bit
MY8-AD
8
20 bit
MY8-AD24
24 bit
MY8-AD96
DA card
MY4-DA 4
—
20 bit
MY8-DA96 8 24 bit
Digital I/O card
MY8-AE
8
AES/EBU
24 bit
MY8-AE96
MY8-AE96S
MY16-AE 16
MY8-AT 8
ADAT
MY16-AT 16
MY8-TD 8
TASCAM
MY16-TD 16
Waves Plug-in
DSP card
Y96K 8 ADAT 24bit
mLAN card MY16-mLAN 16 IEEE1394 24bit
■ Available optional cards
■ Installing an optional card