ZyXEL Communications V300 - Manual (Page 113)

Chapter 10 SIP Account Setup
V300 User’s Guide
113
SIP Server
Address
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 32 printable English keyboard characters. It
does not matter whether the SIP server is a proxy, redirect or register server.
SIP Server
Port
Enter the SIP server’s listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
REGISTER
Server
Address
Enter the IP address or domain name of the SIP register server, if your VoIP
service provider gave you one. Otherwise, enter the same address you entered in
the SIP Server Address field. You can use up to 32 printable English keyboard
characters.
REGISTER
Server Port
Enter the SIP register server’s listening port number, if your VoIP service provider
gave you one. Otherwise, enter the same port number you entered in the SIP
Server Port field.
SIP Service
Domain
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 32 printable English keyboard characters.
Send Caller ID Select this if you want to send identification when you make VoIP phone calls.
Clear this if you do not want to send identification.
Voice Mail
Number
Enter the voicemail number associated with this SIP account.
DNS SRV Select this to use the DNS server(s) you configured in the Network > Ethernet >
Internet Connection screen.
Backup SIP
Server
1st / 2nd
Backup SIP
Server
Select the check box to have the V300 use the backup SIP server(s) you
configure. If the V300 cannot use the server you configured in the SIP Settings
section of this screen, it tries to use the backup server(s). It tries to use the 1st
Backup SIP Server and, if it cannot connect, then tries to use the 2nd Backup
SIP Server.
SIP Service
Address
Enter the IP address or domain name of the backup SIP server provided by your
VoIP service provider. You can use up to 32 printable English keyboard
characters. It does not matter whether the SIP server is a proxy, redirect or
register server.
SIP Service
Port
Enter the backup SIP server’s listening port number, if your VoIP service provider
gave you one. Otherwise, keep the default value.
Register
Service
Address
Enter the IP address or domain name of the backup SIP register server, if your
VoIP service provider gave you one. Otherwise, enter the same address you
entered in the SIP Service Address field for this backup server. You can use up to
32 printable English keyboard characters.
Register
Service Port
Enter the backup SIP register server’s listening port number, if your VoIP service
provider gave you one. Otherwise, enter the same port number you entered in the
SIP Service Port field for this backup server.
Authentication
User Name Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 20 printable English keyboard characters.
Password Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 20 printable English keyboard characters.
Apply Click this to save your changes.
Advanced Setup Click this to edit the advanced settings for this SIP account. The Advanced SIP
Setup screen appears.
Table 46 VoIP > SIP > SIP Settings
LABEL DESCRIPTION