ZyXEL Communications V300 - Manual (Page 85)

Chapter 6 LCD Menus: Advanced
V300 User’s Guide
85
Figure 105 LCD Menu: Auto Provision Server Address - Edit
Enter the new outbound proxy server IP address. Press MENU to save the change.
Alternatively, press PHONEBOOK to return to the previous screen.
6.4.3 Expire Time
Use this screen to see or edit the length of time the V300 waits after receiving an auto-
provisioning file before it requests another.
Select Adv Setting > AutoPro > Expire Time. The following screen displays.
Figure 106 LCD Menu: Auto Provision Expire Time
This screen displays the expire time already configured on the V300. Press MENU to change
the expire time, or press PHONEBOOK to return to the previous screen.
6.4.3.1 Expire Time - Edit
Press MENU in the Expire Time screen. The following screen displays.
Figure 107 LCD Menu: Auto Provision Expire Time - Edit
Enter the new expire time. Press MENU to save the change. Alternatively, press
PHONEBOOK to return to the previous screen.
6.4.4 Retry Time
Use this screen to see or edit the length of time the V300 waits if it cannot get an auto-
provisioning file from the server before trying again.
Select Adv Setting > AutoPro > Retry Time. The following screen displays.
Figure 108 LCD Menu: Auto Provision Retry Time
This screen displays the retry time already configured on the V300. Press MENU to change
the retry time, or press PHONEBOOK to return to the previous screen.
6.4.4.1 Retry Time - Edit
Press MENU in the Retry Time screen. The following screen displays.
123(#to change)
_
4 Expire Time:
3600
4 Expire Time:
3600_
5 Retry Time
1800