4 the auto provision menus, 1 protocol, Cally - see – ZyXEL Communications V300 User Manual
Page 83
Chapter 6 LCD Menus: Advanced
V300 User’s Guide
83
Figure 100 LCD Menu: First / Second Backup SIP Server
The following table describes the labels in this screen.
6.4 The Auto Provision Menus
Use these menus if you have an auto-provisioning server on the network. When auto-
provisioning is used, the V300 downloads its settings automatically from the auto-
provisioning server, meaning you do not have to input them manually.
Select Adv Setting > AutoPro. The following screen appears.
Figure 101 LCD Menu: Auto Provision
The following table describes the labels in this screen.
6.4.1 Protocol
Use this screen to see or edit the protocol that the V300 uses to request and receive the auto-
provisioning file. This protocol must be the same as that used by the auto-provisioning server.
19 BackupSIP:
1 1st BSIP
Table 34 LCD Menu: First / Second Backup SIP Server
LABEL
DESCRIPTION
Active
Use this to have the V300 use the backup server settings you configure in
this menu (Enable) or to have the V300 ignore them (Disable)
SIP Serv Addr
This is the IP address of the backup SIP server. See
for information on how to configure this.
SIP Serv Port
This is the listening port on the backup SIP server. See
for information on how to configure this.
Register Addr
This is the IP address of the backup SIP register server. See
for information on how to configure this.
Register Port
This is the listening port on the backup SIP register server. See
for information on how to configure this.
3 AutoPro
1 Active
Table 35 LCD Menu: Auto Provision
LABEL
DESCRIPTION
Active
Select this to turn auto provisioning on or off.
Protocol
Select this to see or edit the protocol the V300 uses to request and receive
auto-provisioning files.
Serv Addr
Select this to see or edit the auto provisioning server’s IP address.
Expire Time
Select this to see or edit how long the V300 waits after it successfully
receives an auto-provisioning file before it requests another.
Retry Time
Select this to see or edit how long the V300 waits, if it requests an auto-
provisioning file but does not receive one, before requesting the file again.