ZyXEL Communications V300 - Manual (Page 55)

Chapter 5 LCD Menus: Basic Settings
V300 User’s Guide
55
Figure 28 LCD Menu: Anonymous Call
Press MENU. A screen displays showing the current setting. Press MENU to edit the setting.
The following screen displays.
Figure 29 LCD Menu: Anonymous Call Edit
The following table describes the labels in this screen.
5.4.2 Call Forward
Use these menus to set up and activate different kinds of call redirection for incoming calls.
"
You must also turn Call FW Active on (Enable) in the Adv Setting > SIP
Setting menu.
Select Call Preference > Call Forward. The following screen displays.
Figure 30 LCD Menu: Call Forward
The following table describes the labels in this screen.
1 AnonyCall:
1 Active
1 Active:
Disable?
Table 13 LCD Menu: Anonymous Call Edit
LABEL DESCRIPTION
Disable The V300 allows incoming calls that do not have caller ID.
Enable The V300 allows only incoming calls that have caller ID.
2 Call FW:
1 Active
Table 14 LCD Menu: Call Forward
LABEL DESCRIPTION
Active Select this to check whether call forwarding is enabled, and to turn it on or
off. This setting applies to all call forwarding on the V300.
Cond FW Select this to set up call forwarding under certain specific circumstances.
UnCond FW Select this to have the V300 forward calls under all circumstances.
FW Number Select this to set the phone number to which you want the V300 to forward
calls. This setting does not apply to specific call forwarding.