ZyXEL Communications V300 - Manual (Page 141)

V300 User’s Guide
141
C
H A P T E R
15
Tools
This chapter shows you how to upload new firmware, upload or save backup configuration
files and restart the V300.
15.1 Firmware Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
"*.bin" extension, e.g., "V300.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
See the Firmware and Configuration File Maintenance chapter for upgrading firmware using
FTP/TFTP commands.
Click Maintenance > Tools. Follow the instructions in this screen to upload firmware to your
V300.
1
Make sure you have new firmware ready to upload to the V300 before you
click the Uninstall button! If you click this but do not upload new firmware,
your V300 may not work properly.
Figure 137 Maintenance > Tools > Firmware Upload