ZyXEL Communications V300 - Manual (Page 69)

Chapter 6 LCD Menus: Advanced
V300 User’s Guide
69
Enter the new gateway IP address and press MENU to save the change. Alternatively, press
PHONEBOOK to return to the previous screen.
6.2.2.3 Subnet Mask
Select Adv Setting > Network > Static IP > Subnet Mask. The following screen displays.
Figure 60 LCD Menu: Subnet Mask
The number that displays is the subnet mask your V300 is currently set to use. Press MENU to
edit the subnet mask, or press PHONEBOOK to return to the previous screen.
6.2.2.3.1 Subnet Mask - Edit
Press MENU in the Subnet Mask screen. The following screen displays.
Figure 61 LCD Menu: Subnet Mask - Edit LCD Menu: Default Gateway - Edit
Enter the new subnet mask and press MENU to save the change. Alternatively, press
PHONEBOOK to return to the previous screen.
6.2.2.4 First and Second DNS Servers
Use these screens to enter the IP address(es) of DNS (Domain Name System) servers on your
network. Use 1st DNS for the primary (main) server, and use 2nd DNS if you have
information about a secondary (backup) server.
Select 1st DNS or 2nd DNS in the Advanced Setting > Network Setting > Static IP menu. A
screen similar to the following displays (this example uses the 1st DNS screen).
Figure 62 LCD Menu: First / Second DNS
If a DNS server is already configured, its IP address displays. Otherwise, no IP address
displays. Press MENU to edit the DNS server settings, or press PHONEBOOK to return to
the previous screen.
6.2.2.4.1 First / Second DNS - Edit
Press MENU in the 1st DNS or 2nd DNS screen. A screen similar to the following displays
(this example uses the 1st DNS screen).
Figure 63 LCD Menu: First / Second DNS - Edit
4 Subnet Mask
0.0.0.0
4 Subnet Mask
0.0.0.0_
5 1st DNS:
0.0.0.0
5 1st DNS:
0.0.0.0_