Figure 161 macintosh os x: network, Linux – ZyXEL Communications V300 User Manual

Page 172

Advertising
background image

Appendix B Setting up Your Computer’s IP Address

V300 User’s Guide

172

Figure 161 Macintosh OS X: Network

4 For statically assigned settings, do the following:

• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your V300 in the Router address box.

5 Click Apply Now and close the window.
6 Turn on your V300 and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.

Advertising