ZyXEL Communications V300 - Manual (Page 32)

Chapter 2 Hardware
V300 User’s Guide
32
The following table describes the front panel hardware.
Table 1 Front Panel Hardware
LABEL DESCRIPTION
1 Handset cradle.
2 LCD (Liquid Crystal Display) screen.
3 Menu Press this to display the V300’s configuration menu. When the menu
displays, you can press this key again to exit the menu. The menu is not
accessible when a call is in progress.
4 Navigator Use this to move around the V300’s screens. Press to go up one line
in a menu, and press to go down one line. Press to move one
space to the right, and press to move one space to the left.
5 Phonebook Use this to display the list of contacts stored in the V300. You can add,
edit and delete phonebook entries from this screen.
6 Action keys HOLD Use this to put a call on hold. Press it a second time
to take the call off hold.
CONFERENCE Use this to set up a conference call between the
V300 and two other phones, or to split a
conference call you set up into two separate calls.
TRANSFER Use this to transfer a call to another phone.
HANG UP Use this to end a call.
REDIAL Use this to dial the last number that was called from
the V300.
SEND Use this to start a call, once you have entered the
phone number.
7 Function keys The LEDs (lights) in these keys illuminate when they are active.
VOICEMAIL Use this to check your voicemail messages, once
the voicemail number is configured in the V300.
MUTE Use this to mute the current call. The V300 no
longer transmits a signal, but you can still hear the
incoming signal.
DND Use this to toggle the Do Not Disturb function on or
off.
HEADSET Use this to activate a line using the headset, or to
transfer a call to the headset when using the
handset or the speakerphone.
When a line is active and you are using the
headset, press this key to hang up.
SPEAKER Use this to activate a line using the speakerphone,
or to transfer a call to the speakerphone when
using the handset or the headset.
When a line is active and you are using the
speakerphone, press this key to hang up.
8 Alphanumeric
keypad
Use this to enter numbers, letters and symbols. Use the # key to switch
between Number mode, Uppercase mode, Lowercase mode and
Symbol mode.