Yamaha CVP-109 EN - Manual (Page 157)

157
CVP-109/107/105/700
● Polyphonic Aftertouch Data
Aftertouch Data
• Range: 0 — 127 The polyphonic aftertouch data setting determines the amount of
aftertouch that is applied to the specified note. Use the DATA button to
select the polyphonic aftertouch data parameter, then use the data dial
or the [–] and [+] buttons to change the value of this parameter.
■ Editing System Exclusive and Meta Events
......................
• Exclusive data (see page 146) is loaded
into Track 1.
• Meta events (see page 146) are loaded
into the SYSTEM track.
• Meta events that cannot be edited will not
appear in the event list.
Select the System Exclusive or Meta event you want to edit in the
event list for the appropriate track ( 1 or SYSTEM).
➔ The < and > functions are displayed above the third and fourth
LCD buttons.
Every System Exclusive or Meta event is displayed as a series of
two-digit hexadecimal values, each of which represents a byte of data.
< and > functions
System Exclusive Data
• First byte: F0
• Data bytes: 00 — 7F
• Last byte: F7
Meta Event Data
• First byte: FF
• Data bytes: 00 — FF
➾ Use the < and > buttons to select a data byte, then use the
data dial or the [–] and [+] buttons to change the value of the
selected byte. Repeat to edit other bytes as needed.
System exclusive
data
155
The Clavinova can only display the first 35
bytes in a System Exclusive or Meta event.
Any bytes of data beyond this limit cannot
be edited using the Step Edit function.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Step Edit