Yamaha CVP-109 EN - Manual (Page 82)

82
CVP-109/107/105/700
C Enter a chord, if desired.
• If Full Keyboard was last selected as
the accompaniment mode (page 73),
Fingered 1 is automatically selected
when you open the ACMP ASSIST
display. To indicate chords by a differ-
ent method, move the cursor to the top
of the first measure, then open the
ACCOMPANIMENT MODE display
and select an accompaniment mode
(other than Full Keyboard) as de-
scribed on page 71. (You can also set
a different split point in this display.)
The Clavinova will return to the ACMP
ASSIST display when you press the
[EXIT] button.
• The chord input resolution will be
automatically selected according to the
current style. For styles with 2/4, 3/4,
4/4, and 5/4 time signatures, one chord
can be entered on every 8th note or
8th-note triplet. For other time signa-
tures, one chord can be entered for
each measure.
To enter a chord, play the chord with appropriate fingering in the left
range of the keyboard (lower than the split point).
➔ The name of the chord you play appears in the box below the
measure bars, as well as in the ROOT and TYPE functions.
You can also select the ROOT and TYPE buttons, then use the data
dial or [–] and [+] buttons to manually set the chord root and type.
V Enter a style change, if desired.
• Intro patterns can only be entered at
the beginning of a song.
• Style changes, variation changes, and
ending patterns can only be entered at
the beginning of a measure.
• Fill-in patterns can be entered any-
where in the measure. (The “break fill”
pattern triggered by the left pedal
(page 190) cannot be entered using
the Accompaniment Assistance func-
tion, however.)
• A fade-out cannot be entered during a
fade-in.
• You can also use an original style
created using the Custom Style func-
tion (page 91). Only one custom style
can be included in a given set of Ac-
companiment Assistance data.
To add a fill-in pattern at any point in a measure, press the button cor-
responding to the desired fill-in pattern as usual (see page 63).
To change the style variation at the start of a measure without playing
a fill-in pattern, press the button twice.
To change the style at the start of a measure, simply select a new style
in the usual manner (see page 61).
X Move the cursor to the entry point.
• When you first open the ACMP AS-
SIST display, the current AUTO AC-
COMPANIMENT panel settings are
entered at the top of the first measure.
This data is represented as a thick line
segment with no chord (i.e., a series of
dashes).
• You may want to change the data in
the initial segment, setting a chord and
perhaps adding an intro pattern or
fade-in (page 66), before you move the
cursor to another entry point.
The display shows each measure as a horizontal line with 8th-note
divisions. The number of each measure is shown to the left of the
line. Previously entered data is indicated by a thick line segment.
Use the CURSOR < and > buttons, the data dial, or the [–] and [+]
buttons to move the triangular cursor to the point at which you want
to enter a chord or style change.
Measure number Eighth note divisions
Previously entered data
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Other Auto Accompaniment Functions
80
Chord type
Chord root
Chord