Yamaha CVP-109 EN - Manual (Page 194)

194
CVP-109/107/105/700
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
First, select the desired file to be loaded. Press either of the two
leftmost LCD buttons to select the file, then press the OK button.
➔ An “ Are you sure? ” message is displayed. Press the YES button
to load the selected file, or the NO button to abort the Load opera-
tion.
■ SAVE
.................................................................................................................................
When you select SAVE, the name entry function display for the file to
be saved will appear.
Press the CHAR > button to move the underline cursor, and select the
character position of the file name. (File names can contain up to twelve
characters.)
➾ Use the data dial or [–] and [+] buttons to highlight the characters
to be input.
Press the CHAR SET button to input the selected characters at the
current underline position of the file name. Continue moving the cursor
to other characters or marks and entering them in this way.
To delete the character at the previous position, press the BACK
SPACE button. The character before the underline cursor is deleted and
the cursor moves back to the deleted position.
To abort the name entry operation and return to the FUNCTION
[DISK 1] display, press the CANCEL button.
When the file name has been completely entered, press the SAVE
button to execute the Save operation.
If you enter a name that already exists on the disk, a “ Same
name! Overwrite?” message will appear. Press the OK button to
overwrite the original file with the new file, or
CANCEL to cancel the
Save operation.
Disk
192