Yamaha CVP-109 EN - Manual (Page 56)

56
CVP-109/107/105/700
You can also use the left and right LCD buttons to select one of the
effect types listed in the display screen.
To reset the effect type to its basic setting, simultaneously press the
EFFECT TYPE ▲ and ▼ buttons or the [–] and [+] buttons.
➔ The selected effect type is highlighted.
Because the basic setting of the effect type depends on the voice, the
effect type may change automatically when you select a different voice.
If both the [EFFECT] button and the
[REVERB] and/or [CHORUS] buttons are
turned on, all effects will be applied.
■ Varying the Effect
.............................................................................................
Each of the Clavinova’s effect types has a variation that can be se-
lected using the VARIATION functions in the EFFECT 1 and EFFECT
2 displays (page 55). To vary the effect produced by the effect type se-
lected for an effect system, display the EFFECT page for that system,
then press the LCD button under
VARIATION.
VARIATION
• Settings: OFF, ON
• Basic setting: Depends on voice.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Voice Effects (CVP-109/107/700)
■ Changing the Effect Type
..........................................................................
You can change the effect type selection for one of the effect systems
in the appropriate EFFECT display (page 55). Select an effect type using
the
EFFECT TYPE ▲ and ▼ buttons, or highlight the EFFECT TYPE
function and use the data dial or the [–] and [+] buttons.
Effect Type
• Settings: See table on page 219.
• Basic setting: Depends on voice.
➔ The value displayed by the VARIATION function switches be-
tween OFF and ON , and the effect changes.
The way in which the effect changes depends on the effect type (see
the table on page 219). Also, because the basic setting of the VARIA-
TION function depends on the voice, the setting of this function may
change automatically when you select a different voice.
54