Yamaha CVP-109 EN - Manual (Page 221)

221
CVP-109/107/105/700 219
Messages
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
● General (Panel Operation)
This message appears when you try to perform an operation (such as selection of a style
or Music Database setup) that cannot be performed during playback.
➾ Stop song playback, or exit the Song Play mode, then perform the operation again.
This message appears when you try to perform an operation (such as copying or deletion
of song data) that cannot be performed in the Song Record mode.
➾ Stop recording, or exit the Song Record mode, then perform the operation again.
This message appears when you try to perform an operation (such as the selection of a
style, etc.) that cannot be performed during Accompaniment Assistance playback, or an
operation (such as selection of a Guide Control function, etc.) that cannot be performed
while editing Accompaniment Assistance data.
➾ Turn the Accompaniment Assistance function off, then perform the operation again.
A button that does not have a function in the current mode has been pressed.
● General (Direct Access)
This prompt appears when you press the [DIRECT ACCESS] button (page 22).
➾ Press the panel button that corresponds to the settings you want to display. (Be
sure to press the second button while this message is showing.)
This message appears if you press [DIRECT ACCESS] followed by a panel button that
does not correspond to a Direct Access display. (See page 22.)
➾ Press [DIRECT ACCESS] again, then press a panel button that corresponds to a
Direct Access display.
This message appears when you try to perform an operation (such as song data conver-
sion) that cannot be performed during recording or playback.
➾ Stop song recording or playback, or exit the Song Record or Song Play mode, then
perform the operation again.
● General (Disk-related)
This prompt appears when there is no disk in the disk drive.
➾ Put the proper disk in the drive and attempt the operation again.
This prompt appears when you attempt to rename or convert a song that doesn’t contain
any data.
➾ Select a song that contains data, or insert a disk with song data into the floppy disk
drive.
This message appears when you attempt to load, rename, or delete a file, and no file of
the specified type can be found on the disk in the disk drive.
➾ Create a file or insert a disk with a proper file.
This message appears if you try to save Accompaniment Assistance data to disk (page
86) when no Accompaniment Assistance data has been recorded. It also appears if you try
to save a custom style to disk (page 101), but have selected a memory number that
doesn’t contain any style data.
➾ Create some Accompaniment Assistance data or a custom style, or select a
memory number that contains custom style data.