Yamaha CVP-109 EN - Manual (Page 52)

52
CVP-109/107/105/700
If you press the [ < ] button or the [ > ]
button while the CHORUS page is show-
ing, the REVERB DEPTH page or the
EFFECT 1 page (the EFFECT page on
the CVP-105) will be displayed. Refer to
the other sections of this chapter for
details on reverb and other effect set-
tings.
■ Changing the Chorus Type
....................................................................
You can change the chorus type selection in the CHORUS page. Se-
lect the chorus type using the left and right LCD buttons.
Chorus Type
• Settings: See table on page 219.
• Basic setting: Depends on style.
You can also change the chorus type using the CHORUS TYPE ▲
and ▼ buttons, or by selecting the CHORUS TYPE function and using
the data dial or the [–] and [+] buttons.
➔ The selected chorus type is highlighted.
Because the basic setting of the chorus type depends on the accompa-
niment style, the chorus type may change automatically when you select
a different style.
• The chorus type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
chorus type is selected.
• It is also possible to apply chorus
effects to the keyboard voices using
the [EFFECT] button. See the Effect
Type List on page 219 for details.
• If both the [CHORUS] button and the
[REVERB] and/or [EFFECT] buttons
are turned on, all effects will be ap-
plied.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Chorus
Changing the Chorus Settings
■ Displaying the Chorus Settings
.....................................................
Press [DIRECT ACCESS], then [CHORUS] to display the CHO-
RUS display page.
DUAL SPLIT REVERB CHORUS EFFECT
EXIT DIRECT ACCESS ➾
➔ The LCD displays the CHORUS page.
50
CVP-107/700
CVP-107/700