Yamaha CVP-109 EN - Manual (Page 47)

47
CVP-109/107/105/700
Effects
On the CVP-109, the NATURAL
REVERB display is page 1; the REVERB
and REVERB DEPTH pages are num-
bered 2 and 3, respectively.
X X X X X Use the PAGE [<] and [>] buttons to switch between the NATURAL
REVERB page (CVP-109), the REVERB page, and the REVERB
DEPTH page.
Changing the Reverb Settings
You can change the reverb type and depth using the REVERB and
REVERB DEPTH display pages. With the CVP-109, you can also select
a Natural Reverb effect from the NATURAL REVERB page.
■ Displaying the Reverb Settings
.........................................................
Z Z Z Z Z Press [DIRECT ACCESS], then [REVERB].
If you are using the CVP-109, the LCD will display the NATURAL
REVERB page, the REVERB page, or the REVERB DEPTH page.
If you press the [ > ] button while the
REVERB DEPTH page is showing, the
CHORUS page will be displayed. Refer
to the other sections of this chapter for
details on chorus and other effect set-
tings.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Reverb
➾ DUAL SPLIT REVERB CHORUS EFFECT
EXIT DIRECT ACCESS
➔ The LCD displays either the REVERB page or the REVERB
DEPTH page (whichever was selected most recently).
CVP-107/700
CVP-109
45