Yamaha CVP-109 EN - Manual (Page 190)

190
CVP-109/107/105/700
■ Left Pedal & Glide Range
...........................................................................
Pedal
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
FUNCTION [PEDAL] Display — page 3
LEFT PEDAL
• Settings: See table at left.
• Basic setting: SOFT
This function conveniently lets you set the left pedal to control one of
various functions.
LEFT PEDAL Settings
Setting Description
SOFT
The left pedal functions as the soft pedal (basic setting). (See
page 45.)
DAMPER
The left pedal functions as a switched damper pedal (see the
description of the SW.DAMPER setting of the RIGHT PEDAL
function on page 191). This setting is useful when you set the
right pedal to control pitch bends.
START/STOP
The left pedal functions as the [START/STOP] button. (See
page 64.)
HARMONY
When the Harmony function is set to on, Harmony is applied
only while the left pedal is held down. (See page 87.)
REGISTRATION
The panel settings registered to the next Registration number
are recalled each time the left pedal is pressed. (See page
109.)
REG.FREEZE
The left pedal switches the Registration Freeze function on
and off; that is, it performs the same function as the FREEZE
button in the REGISTRATION [FREEZE] display (page 111).
ENDING/RIT
The left pedal functions as the [ENDING] button. You can
have the song end ritardando (slow down gradually) by press-
ing the left pedal twice in succession. (See page 67.)
BREAK
Pressing the left pedal during style playback produces a break
in the accompaniment and rhythm for as long as the pedal is
held. When the pedal is released, normal playback resumes
from the next measure. If you press the left pedal a second
time within one measure, normal playback resumes immedi-
ately.
BREAK FIL
Pressing the left pedal during style playback causes the
Clavinova to play a special “break fill-in” pattern. This pattern
is different from the fill-in patterns produced by the Auto Fill
function. (See page 63.)
BASS HOLD
While the left pedal is pressed, the bass note played by the
Auto Accompaniment will be held even if the chord is
changed. This function does not work when FULL KEY-
BOARD is selected as the accompaniment mode (page 73).
FADE IN/OUT
The left pedal performs the function same as the [FADE IN/
OUT] button. (See pages 67 and 68.)
EFF1 VARI
This function switches the effect variation on or off for effect
system 1; that is, it performs the same effect as the VARIA-
TION button in the EFFECT 1 display (page 56).
EFF2 VARI
This function switches the effect variation on or off for effect
system 2; that is, it performs the same effect as the VARIA-
TION button in the EFFECT 2 display (page 56).
EFFECT VARI
This function switches the effect variation on or off; that is, it
performs the same effect as the VARIATION button in the
EFFECT display (page 60).
If the left pedal is set to REGISTRATION,
the setting of the left pedal function in
Registration memory is not recalled.
188
(CVP-109/107/700)
(CVP-109/107/700)
(CVP-105)
(CVP-109/107/700)