Yamaha CVP-109 EN - Manual (Page 183)

183
CVP-109/107/105/700
• The HARMONY PART value may
change automatically if the HARMONY
MODE function is set to AUTO and the
performance method is changed (see
page 181).
• The HARMONY PART function is not
available when the current vocal har-
mony type uses either Chromatic
mode or Detune mode as the vocal
harmony mode (page 185). In such
cases, a row of dashes (- - -) is dis-
played in place of the HARMONY
PART value.
You can also cycle through the values by holding down the HAR-
MONY PART button.
LOCK
• Settings: OFF, ON
• Basic setting: OFF
The current Vocal Harmony settings may be altered if you play back a
song that contains Vocal Harmony data, if you select a registered panel
setup (page 109), or if the Clavinova receives MIDI messages that
specify different Vocal Harmony settings. If you wish, you can use the
LOCK function on page 3 of the VOCAL HARMONY display to prevent
the Vocal Harmony settings from changing in such circumstances.
Press the LOCK button to lock or unlock the current Vocal Harmony
settings.
➔ The setting switches between ON and OFF each time you press
the button.
You can also use the Registration Freeze
function to prevent the Vocal Harmony
settings from being changed when a
registration is selected.
Select ON if you want to protect the current the Vocal Harmony set-
tings.
Harmony is based on:
Part
R1
LEFT
ACMP
1 — 16
XF
(Chordal mode) (Vocoder Mode)
No harmony Main keyboard part
Left keyboard part in Split mode
Auto Accompaniment chords No harmony
Specified song track
No harmony Vocal Harmony data in XF/XG file
181
■ Locking the Vocal Harmony Settings
............................................
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Singing with Vocal Harmony
(CVP-109/107/700)