Yamaha CVP-109 EN - Manual (Page 187)

187
CVP-109/107/105/700
■ Using the Utility Functions
.......................................................................
As the table on the preceding page shows, the utility functions are
divided among 17 display pages (16 pages on the CVP-105). Use the
following procedure to display the page containing a desired function.
Z Press the [FUNCTION] button.
MIXER FUNCTION
MASTER
EQUALIZER
SONG
X Display the desired group.
If you prefer, you can skip to step 3 and
select a page directly using the PAGE
[
< ] and [ > ] buttons.
The upper half of the Function mode display contains a list of the
function groups. As a shortcut, you can use the left and right LCD
buttons to display the function group containing the function you
want to set.
➔ The most recently used display page within the selected group is
displayed.
C Display the desired page.
Use the PAGE [<] and [>] buttons to display the page that contains
the function you want to set.
You can also exit the Function mode by
pressing the [EXIT] button.
➔ The [FUNCTION] lamp goes out.
➔ The lamp lights and the most recently used page of the Function
mode display appears.
185
V Perform the desired operation.
Refer to Chapter 2 “Basic Operation” for instructions regarding the
selection and use of the various types of functions.
B Press the [FUNCTION] button when finished.