Yamaha CVP-109 EN - Manual (Page 191)

191
CVP-109/107/105/700
■ Right Pedal & Bend Range (CVP-109/107/700)
...................
RIGHT PEDAL
• Settings: See table at left.
• Basic setting: Depends on main voice.
This function lets you set the right pedal of the CVP-109/107/700 to
one of two damper modes, or to control upward and downward pitch
bends.
RIGHT PEDAL Settings
S e t t i n g D e s c r i p t i o n
CONT.DAMPER
The right pedal functions like a standard damper pedal.
The sustain length is increased by degrees depending on
how far the pedal is pressed.
S W . D A M P E R
The right pedal functions as a damper on/off switch. The
sustain length increases when the pedal is pressed, and
returns to normal when it is let up.
BEND UP
Pressing the right pedal bends the pitch upward to the
maximum amount specified by the BEND RANGE func-
tion.
BEND DOWN
Pressing the right pedal bends the pitch downward to the
maximum amount specified by the BEND RANGE func-
tion.
CVP-105 Damper
The right pedal on the CVP-105 functions
as a damper on/off switch (see the de-
scription of the SW.DAMPER setting in
the table at left).
BEND RANGE
• Settings: 1 — 12 (semitones)
• Basic setting: Depends on main voice.
• The GLIDE RANGE function may be
displayed in place of the BEND
RANGE function when the LEFT
PEDAL function is set to one of the
GLIDE settings. To display the BEND
RANGE function, press the RIGHT
PEDAL button and select BEND UP or
BEND DOWN, if necessary.
Pedal
CVP-109/107/700
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Pressing the left pedal causes the pitch to rise an amount
specified by the GLIDE RANGE function. When the pedal is
released, the pitch glides smoothly back to normal at one of
three speeds (slow, medium or fast, depending on the se-
lected setting).
Pressing the left pedal causes the pitch to drop an amount
specified by the GLIDE RANGE function. When the pedal is
released, the pitch glides smoothly back to normal at one of
three speeds (slow, medium or fast, depending on the se-
lected setting).
189
S e t t i n g D e s c r i p t i o n
GLIDE UP S
GLIDE UP M
GLIDE UP F
GLIDE DOWN S
GLIDE DOWN M
GLIDE DOWN F
GLIDE RANGE
• Settings: 1 — 12 (semitones)
• Basic setting: 1
• On the CVP-109/107/700, the BEND
RANGE function may be displayed in
place of the GLIDE RANGE function
when the RIGHT PEDAL function is
set to BEND UP or BEND DOWN. To
display the GLIDE RANGE function,
press the LEFT PEDAL button and
select one of the GLIDE settings, if
necessary.
LEFT PEDAL Settings (continued)
Because the basic settings of the Right Pedal and Bend Range func-
tions depend on the current voice selection, the settings of these func-
tions may change automatically when a different voice is selected. (The
Bend Range value will change automatically only if
BEND UP or BEND
DOWN is specified as the Right Pedal basic setting for the selected
voice.)