Yamaha CVP-109 EN - Manual (Page 163)

163
CVP-109/107/105/700
V Select a note style.
.......................................................................................
Note Style
• Setting: (normal),
(staccato),
(tenuto)
• Basic setting:
Press the second right LCD button to display the playing style for
the note you are going to record. The style you select affects the gate
time of the note. You can select one of three styles: normal, staccato, or
tenuto.
➔ The note style changes each time you press the button.
B
Select a note type.
........................................................................................
Note Type
• Setting: (normal),
(dotted),
(triplet)
• Basic setting:
Press the third right LCD button to display the type of note you
want to record. You can select one of three note types: normal, dotted,
or triplet.
The note type that you choose here will be used to modify the note
or rest length you specify in step 6, below. To enter a dotted quarter
note, for example, you would select (dotted) here, then press the
(quarter note) button in step 6.
➔ The note type changes each time you press the button.
N
Enter a note or a rest.
...............................................................................
● To record a note (or chord): • If you press an LCD button without hold-
ing down a key on the keyboard, the
previously specified note data (i.e., dy-
namic, note style, and note type) will be
recorded.
• If there is already a note of the same
pitch at the specified location, the new
note will not be entered.
Hold down one or more keys on the keyboard, then press the LCD
button that corresponds to the desired note length (from whole note to
sixteenth note).
➔ The specified note data is added to the event list, and the timing
is advanced according to the selected note length. (If more than
one key was held down, note data for each key is recorded at
the specified timing.)
161
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Step Edit