Yamaha TG500 - Manual (Page 114)

102
1-4: LFO
VOICE EDIT MODE / 1: Quick Edit
1-4: LFO
Here, the main LFO parameters are simplified and concentrated in a single screen
for quick, easy programming.
For full LFO parameters see page 136.
VCE QED LFO <Type >
1:vibrato 33 64
Type (LFO modulation type)
Range: --------, 1: vibrato, 2: tremolo, 3: wahwah
Determines whether the LFO will produce vibrato (pitch modulation),
tremolo (amplitude modulation), or wahwah (filter cutoff modulation) effects.
The current LFO parameter settings (page 136) are selected when this param-
eter is set to “--------”.
Speed
Range: 0 … 99
Sets the speed of the LFO.
“0” is the slowest speed setting, producing an LFO speed of approximately
0 Hertz. The fastest setting of 99 produces an LFO speed of approximately 25
Hertz.
Depth
Range: 0 … 127
Sets the maximum amount of amplitude (tremolo), pitch (vibrato), or filter
cutoff (wahwah) modulation that can be applied to the current voice.
A “0” setting produces no modulation while a setting of “127” produces
maximum modulation.
Type Speed Depth
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 1: Quick Edit -> [ENTER] -> [PAGE]
-> 1-4 : LFO -> [ENTER]